Garage Door Cable Repair in Overton, TX | Garage Door USA
from $149
Garage Door Garage Door Cable Repair Overton, TX
Lift-cable replacement, drum re-spooling, and tension recalibration. We pair new cables with a spring inspection so the door is safe and balanced before we leave.
Local matters for garage door cable repair. In Overton and neighboring New London, Arp, Kilgore, and Liberty City, the failures we address most are swollen, sticking wood doors in summer humidity, storm-driven debris and water in the tracks, corroded springs and cables in the humid air, and mildew and rust on shaded, north-facing doors, all backed by our 10-year workmanship guarantee.
Ask any Overton tech and they'll tell you the climate decides what fails. Hot, humid summers and short, mild winters, with frequent storms and moisture that lingers in the air most of the year brings salt-tinged coastal air that accelerates rust near the shore, damp garages that pit galvanized parts over time, and morning condensation that collects on cold metal hardware, year after year.
Run down the service log for Overton and the same repairs repeat: swollen, sticking wood doors in summer humidity, storm-driven debris and water in the tracks, corroded springs and cables in the humid air, and mildew and rust on shaded, north-facing doors. We carry every part needed to close them out in one trip.
Lift cables transfer the spring's stored energy to the door panels — they're under high tension every cycle and degrade slowly through fraying, corrosion, and mis-spooling on the drum. A cable repair visit replaces both cables (always replace as a pair so the door stays balanced), re-spools the drums to the correct number of wraps, recalibrates spring tension to match, and inspects related components like the bottom bracket where one end of each cable terminates.
Cables are galvanized aircraft-grade steel — typically 1/8-inch diameter for residential doors and 3/16-inch for heavier or commercial doors. We carry both diameters along with the bottom-bracket fittings, drum caps, and shaft set-screws that occasionally need replacement alongside the cables.
Cable failure usually leaves the door off-track or hanging crooked. Continuing to operate the opener after one cable has snapped causes the other side to take the full load and is the fastest way to bend tracks or damage panels. Stop the opener and call for repair when you see a frayed or snapped cable — fast service is standard.
Strands of steel poking out of the cable indicate active wear. Cables don't self-heal — frays accelerate to snap.
Door hangs crooked when closed
If one corner is higher than the other when the door is fully down, one cable has stretched, slipped on the drum, or partially failed.
Snapped cable, door stuck
A fully snapped cable leaves the door off-track or jammed. Don't try to force it — call for repair.
Rust streaks on cables
Coastal homes see cable corrosion progress until the strands weaken. Visible rust means the cable is no longer at full strength.
Loud bang followed by crooked door
Cable snap sounds similar to spring snap but is usually quieter. If the door is crooked after the noise, suspect cable failure.
Common causes & what we fix
Mis-spooled drum
When a cable jumps off its drum groove, it crosses over itself and wears at the crossover point. Re-spooling fixes the spool but the wear point becomes the weak link.
Drum cap or set-screw failure
If the drum slips on the shaft, one cable unwinds while the other tries to hold. This sudden imbalance can snap the loaded cable.
Bottom bracket failure
The bracket where the cable attaches at the door bottom occasionally cracks or pulls free, letting the cable whip free under tension.
Coastal corrosion
Salt-air pitting on uncoated cables can drop tensile strength 30–40% over 10+ years. Galvanized aircraft cables resist this far better.
Spring imbalance
An over- or under-tensioned spring puts uneven load on the cables and accelerates wear on the loaded side.
Our process
1
Call or schedule online. Booking garage door cable repair is two clicks or one call: select a 2-hour window and get a named, photo-tagged tech confirmation within five minutes.
2
On-site diagnosis. On arrival we diagnose the garage door cable repair on-site — free for most repairs, $39 on minor service calls (waived if you proceed). You see the issue and the fix before we start.
3
Flat-rate quote. Every garage door cable repair is priced flat-rate and written down before we touch a tool. No hourly meter, no commissioned upsell — the techs earn a salary, not a cut.
4
Same-visit fix. Your garage door cable repair in Overton is almost always a single-visit fix — our first-call rate is 96%. We test the door alongside you and leave the space cleaner than we found it.
How much does garage door cable repair cost in Overton, TX?
How much does garage door cable repair cost in Overton? It starts at $149, and we quote the exact flat rate before touching a tool. Seniors (65+) and military save 10% on labor, and larger jobs qualify for 0% financing for 12 months. Comparing garage door cable repair cost in Overton? The written flat rate holds for 30 days, and 0% financing covers the larger jobs.
Garage Door Cable Repair the United States starts at from $149, and we quote garage door cable repair at a flat rate in writing before lifting a tool — no hidden add-ons, no hourly creep. A 10% labor discount applies for seniors (65+) and military, and Synchrony offers 0% APR for 12 months on projects over $1,500, approved quickly with no prepayment penalty.
Why homeowners in Overton, TX choose us for garage door cable repair
What keeps Overton calling us back for garage door cable repair: a CSLB-licensed (#1098234), background-checked crew that knows Texas's humid subtropical region, arrives in about 78 minutes, and tells you honestly when a repair beats a replacement. Professional garage door cable repair in Overton, TX means a named tech at your door and a flat-rate quote before any work starts.
Our work is backed for the long haul: the garage door cable repair workmanship guarantee runs 10 years — separate from any manufacturer warranty on the parts themselves. If the garage door cable repair we performed fails because of how we did it, we come back and fix it free for a full decade. Springs rated for 30,000 cycles carry a lifetime warranty for the original homeowner, and parts and accessories carry standard 1–5 year warranties depending on the item.
Our garage door cable repair quotes in Overton are built on honest scope: no padded line items, salaried technicians with no commission to chase, and a transparent diagnostic so you see the real condition of every part. We'll tell you straight whether to repair or replace, and the flat-rate garage door cable repair quote is written and good for 30 days.
Areas we serve for garage door cable repair
We provide garage door cable repair throughout Overton, TX and the surrounding Rusk County area. Serving Overton and surrounding neighborhoods.
Some geography behind our garage door cable repair: Overton lies within Rusk County, in Texas. Overton is inside that, and we cover the whole of it.
Live at the edge of Overton? Our garage door cable repair also covers New London, Arp, Kilgore, and Liberty City and everything between, with no premium for being a few minutes out. We handle garage door cable repair around 75684 and the rest of Overton, TX on one daily route.
Garage Door Cable Repair near you in Overton, TX
Homeowners across New London, Arp, Kilgore, and Liberty City and Overton reach us first for garage door cable repair near them because proximity is real here — stocked trucks staged in Rusk County, not a dispatcher three states away.
Overton is part of our greater Garland, TX metro service area.
Our garage door cable repair trucks reach ZIP codes 75684 and the nearby area. Since Overton conditions change garage door cable repair reach times hour to hour, we hold the ETA until you call and can give you a real one. The dispatch line goes straight to an on-call tech, never to voicemail. For local garage door cable repair in Overton, TX, including 75684, we route the nearest stocked truck straight to your door.
Frequently asked about garage door cable repair
Top questions homeowners searching for Garage Door Cable Repair near me ask us:
Census data puts 71% of Overton homes at pre-1980 construction (median build year 1966) — old enough that many garages still run their original springs, opener, and seals, all long past rated life.
Overton sits in hot, humid summers and short, mild winters, with frequent storms and moisture that lingers in the air most of the year. That is hard on a door — salt-tinged coastal air that accelerates rust near the shore, damp garages that pit galvanized parts over time, and morning condensation that collects on cold metal hardware all accelerate wear on springs, seals, and openers, so the failures we see most here are swollen, sticking wood doors in summer humidity, storm-driven debris and water in the tracks, corroded springs and cables in the humid air, and mildew and rust on shaded, north-facing doors. We size springs and seals for Texas's humid subtropical region conditions rather than a generic catalog spec.
No — running the opener with a failed cable bends tracks and risks the door coming off the rail entirely. Disconnect the opener and avoid using the door until repair.
Cable repairs are quoted flat-rate before starting; the figure depends on whether the drums or a bottom bracket also need replacement. No surprises once you approve the written quote.
Most cable jobs run 45–60 minutes including spring tension verification and balance test. Add 15 minutes if drums also need replacement.
Cables on a balanced door wear at the same rate. The second cable is days to weeks behind the first. Replacing both at once is faster, cheaper than two visits, and properly re-balances the door.